COSI 2016
Below please find the conference program 2016.
The COSI 2016 awards are found here.
A photogalleri from COSI 2016 is found will here.
Invited speakers COSI 2016:
- Prof Dean Webster, North Dakota State University, Fargo, North Dakota, USA “Coatings from renewables: achieving performance”
- Dr Sylvain Caillol, Insitute Charles Gerhardt, Montpellier, France ”Biobased and low environmental impact coatings”
- Dr Jill E Seebergh, The Boeing Company, Seattle, USA ”Development of icephobic coatings for aerospace applications”
- Prof Stuart Lyon, The University of Manchester, UK “Advanced analytical tools for the examination of coatings structure and environmental damage“
- Prof Katja Loos, University of Groningen, Groningen, the Netherlands “Enzymatic modifications and polymerizations for coating materials“
- Prof Geraint Williams, Swansea University, Wales “Cr(vi)-free corrosion protection of galvanised steel by organic coatings containing novel smart-release pigments”
- Prof Alicia Duran, Instituto de Cerámica y Vidrio, Madrid, Spain ”Corrosion protecting and multifunctional sol-gel coatings for light alloys”
Monday 27 June 2016
| 20:00 – 22:00 |
Registration / Reception |
Tuesday 28 June 2016
Plenary Session: Functional coatings and durability
| 9:00 – 9:45 |
J. E. Seebergh, The Boeing Company, Seattle, USA ”Development of icephobic coatings for aerospace applications” |
| 9:45 – 10:15 |
C. J. Wohl, J. G. Smith Jr., J. Palacios, T. Knuth, M. H. Shanahan, A. J. Bosh, R. E. Kreeger, J. W. Connell, E. J. Siochi, NASA Langley Research Center, Hampton, Virginia, USA ” Aircraft Surfaces to Mitigate Environmental Contamination” |
| 10:15 – 10:45 |
V. B. Møller, K. Dam-Johansen, S. M. Frankær, S. Kiil, Technical University of Denmark, Lyngby, Denmark, ”Experimental investigation of coating degradation during simultaneous acid and erosive particle exposure” |
| 10:45 – 11:15 |
Break |
| 11:15 – 12:00 |
S. Lyon, The University of Manchester, Manchester, UK “Advanced analytical tools for the examination of coatings structure and environmental damage“ |
| 12:00 – 12:30 |
T. Hauffman, S. Pletincx, L. Fockaert, M. Sababi, D. Vogel, M. Rohwerder, A. Mol, H. Terryn, Vrije Universiteit Brussel, Brussels, Belgium, ”Interfaces in hybrid structures: a non-destructive, in situ insight in bonds and failure” |
| 12:30 – 13:00 |
I. Alig, H. Oehler, B. Steinhoff, C. Schaller, W. Weh, and A. Weier, Fraunhofer Institute for Structural Durability and System Reliability, Darmstadt, Germany, ”Monitoring of dewing and re-drying of exterior paints by combining NIR spectroscopy, image capturing and gravimetric measurements” |
| 13:00 – 14:30 |
Buffet Lunch |
Plenary Session: Corrosion and durability
| 14:30 – 15:00 |
A. Duran, Instituto de Cerámica y Vidrio, Madrid, Spain ”Corrosion protecting and multifunctional sol-gel coatings for light alloys” |
| 15:00 – 15:30 |
M. Reichinger, M. Dornbusch, Niederrhein University of Applied Sciences, Krefeld, Germany, ”Salt Water Transport through an Automotive Coating System & its Physicochemical Aftermaths” |
| 15:30 – 16:00 |
S. Chimenti, J. M. Vega, M. Aguirre, E. García-Lecina, J. A. Díez, H.-J. Grande, M. Paulis, J. R. Leiza. University of the Basque Country, San-Sebastian, Spain ”Influence of phosphate based surfactant on the corrosion protection properties of waterborne coatings ” |
| 16:00 – 16:30 |
Break |
Plenary Session: Corrosion and Durability
| 16:30 – 17:00 |
W. Bremser, University of Paderborn, Paderborn, Germany and H. Hintze-Brüning, BASF Coatings GmbH, Münster, Germany “Interphase dominated material properties – is there evidence in real coatings?“ |
| 17:00 – 17:30 |
C. Schreiner, S. Scharf, V. Stenzel, A. Rössler, Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM, Bremen, Germany ”Self-healing through microencapsulated agents for protective coatings” |
| 17:30 – 18:00 |
D. Vijayshankar, A. Bashir, M. Rohwerder, Max-Planck-Institut für Eisenforschung GmbH, Dusseldorf, Germany, ”Unraveling the Degradation Mechanism of Buried Metal-Organic Coating Interface by a new Hydrogen Permeation Based Potentiometry Approach” |
| 19.00 – 22:00 |
Conference Barbecue |
Wednesday 29 June 2016
Plenary Session: Functional coatings and chemistry
| 8:45 – 9:30 |
K. Loos, University of Groningen, Groningen, the Netherlands “Enzymatic modifications and polymerizations for coating materials“ |
| 9:30 – 10:00 |
I. Jiménez-Pardo, P. P. W. Mommers, L.G.J. van der Ven, R.A.T.M. van Benthem, A.C.C. Esteves and G. de With, Eindhoven University of Technology. Eindhoven, the Netherlands, ”Branched polycarbonates as polymeric matrix for hydrophilic antifouling coatings” |
| 10:00 – 10:30 |
S.J. Garcia, Delft University of Technology, Delft, The Netherlands, ”How well does it heal?: Quantification of the true healing potential of intrinsic self-healing polymeric coatings” |
| 10:30 – 11:00 |
Break |
| 11:00 – 11:30 |
S. Ma, Eindhoven University of Technology. Eindhoven, the Netherlands ”Isocyanate-free water-borne polyurea dispersion for coating applications” |
| 11:30 – 12:00 |
M. Jawerth, M. Lawoko, S. Lundmark, C. Perez, M. Johansson, KTH Royal Institute of Technology, Stockholm, Sweden ”Selective modification of Low Molecular Weight Lignin Model Compounds for Thermoset Resin Applications” |
| 12:00 – 12:30 |
L. Gustini, C. Lavilla , C. E. Koning, Eindhoven University of Technology. Eindhoven, the Netherlands ”Sustainable coatings from bio-based polyesters with enhanced functionalities” |
| 12:30 – 13:45 |
Buffet lunch |
| 13:45 – 21:00 |
Social program |
Thursday 30 June 2016
Plenary Session: Analysis
| 8:45 – 9:30 |
G. Williams, Swansea University, Wales “Cr(VI)-free corrosion protection of galvanised steel by organic coatings containing novel smart-release pigments” |
| 9:30 – 10:00 |
R.K. May, I.S. Gregory, TeraView Ltd, Cambridge UK, ”Automotive Paint Thickness Analysis by Terahertz Sensing” |
| 10:00 – 10:30 |
A. Nazarov, D. Thierry, French Corrosion Institutel, Brest, France, ”Characterization of the metal-polymer interface by Scanning Kelvin probe.” |
| 10:30 – 11:00 |
Break |
Plenary Session: Renewable systems
| 11:00 – 11:30 |
D. Webster, North Dakota State University, Fargo, North Dakota, USA “Coatings from renewables: achieving performance” |
| 11:30 – 12:00 |
C. Resetco, T. Dikić, D. Frank, T. Verbrugge, F. E. Du Prez, Ghent University, Ghent, Belgium, ”Bioinspired thiolactone chemistry platform for multifunctional coatings” |
| 12:00 – 12:30 |
C.E. Koning, A. Lansbergen, F. Koldijk, H. Hendriks, A. Papegaaij, R. Smabers, P. Buijsen, DSM Coatings Resins, Zwolle, the Netherlands, ”Novel renewable alkyd resins based on imide structures” |
| 12:30 – 14:00 |
Buffet Lunch |
| 14:00 – 15:30 |
Poster Session I |
| 15:30 – 16:00 |
Break |
Plenary Session: Chemistry and Renewable systems
| 16:00 – 16:30 |
S. Caillol, Insitute Charles Gerhardt, Montpellier, France ”Biobased and low environmental impact coatings” |
| 16:30 – 17:00 |
M.C. Flickinger, J.J. Broglie, O.I. Bernal, M.J. Schulte, C.B. Mooney, O.D. Velev, North Carolina State University, Raleigh, North Carolina, USA, ”Biocomposite coatings: Expanding the functionality of waterborne latex coatings by incorporating concentrated living microorganisms” |
| 17:00 – 17:30 |
E. A. Murillo, M. C. Mejía, Universidad Francisco de Paula Santander, San José de Cúcuta, Colombia, ”Styrene-hydroxyethyl acrylate copolymer based alkyd resins with comb type structural morphology obtained with high solid content and low viscosity” |
|
|
| 18:30 – 20:00 |
Poster Session II , including drinks |
| 20:15 – 22:00 |
Buffet Dinner |
Friday 1 July 2016
Plenary Session: Functional coatings and film formation
| 8:45 – 9:15 |
C. Zea, R. Barranco-García, B. Chico, J. Simancas, M. Morcillo and D. de la Fuente, National Centre for Metalurgical Research, Madrid, Spain, ”Hollow mesoporous silica nanoparticles loaded with phosphomolybdate as smart anticorrosive pigment” |
| 9:15 – 9:45 |
A. Beaugendre, S. Bellayea, S. Degoutin, C. Pierlot, R. Lebeuf, S. Duquesne, M. Casetta, M. Jimenez, Université Lille Nord de France, Lille, France, ”Epoxy/silicon self-stratifying coatings” |
| 9:45 – 10:15 |
B. Reuvers and A. Veurink. DSM, the Netherlands, ”Water-borne topcoats, It’s the final flow that makes the coating shine. ” |
| 10:15 – 10:45 |
Break |
| 10:45 – 11:15 |
F. Seeler, C. Hager, O. Tiedje, M. Schneider, Fraunhofer Institute for Manufacturing Engineering and Automation, Stuttgart, Germany, ”Simulations and practical experience in the optimisation of paint film levelling” |
| 11:15 – 11:45 |
C. Bjerremand, M. Hinge, Aarhus University, Aarhus, Denmark ”Temperature- and Time Dependency on High Friction between Paper Coated with poly(Styrene-co-Butyl Methacrylate) and Wood” |
| 11:45 – 12:15 |
M. Jonsson, J. Nordin, O. Sandin, AkzoNobel Pulp and Performance Chemicals, Sundsvall, Sweden “Reflective properties of hollow microspheres” |
| 12:15 – 13:00 |
Closing and Awards Presentation |
| 13:00 – 14:15 |
Buffet Lunch |
